TRACE-GAS TDLAS OEM-Technology

Hot-Wet Gas Analysis
up to 190 °C: Calibration-Free Measurement with TDLAS & QCL Technology

Measure reactive, corrosive, and humid gases such as CH₄, N₂O, CO, CO₂, H₂O, O₂ or H₂S (and many other species) directly in the hot gas stream—without complex sample preparation, without condensation, and completely drift-free.

The challenge in Gas analysis

Preventing condensation and signal loss in conventional methods

When humid process gases must be cooled down prior to analysis, you face a high risk of condensation and the loss of water-soluble gas components in the sample gas cooler. The result: distorted measurement values, clogged lines, corrosion, and immense maintenance overhead.

The TRACE-GAS Solution: We keep the entire sampling and measurement system—from gas sampling to the filtration system and the optical measuring cell—heated constantly up to 190 °C. The chemical composition remains completely unchanged, making dry/wet corrections for total emission determinations entirely obsolete.

Your benefits at a glance

Zero cross-sensitivity to water

Even extreme moisture (H₂O concentrations up to 20% and higher) does not interfere with target gas readings thanks to the narrow linewidth and spectral precision of our lasers.

Calibration-free operation

By continuously comparing the measured spectrum against the theoretical HITRAN database (Spectral Correlation Check), the system operates completely drift-free. Routine recalibration is eliminated.

Real-Time Response (t₁₀–t₉₀ < 1 s)

Perfect for highly dynamic processes, fast control loops, and engine test benches.

Configurable for up to 10 gases

By using multi-laser configuration several gases can be measured simultaneously.

Reach out for a consultation on your project:

One platform – Multiple gas applications with TDLAS

The TRACE-GAS LAS technology platform is exceptionally versatile. Depending on your application, it can be equipped with dedicated TDLAS or QCL light sources tailored to key industrial focus areas:

CH₄ (Methane)

Leak detection across gas infrastructure and measuring methane slip in gas turbine combustion processes.

CH₄, N₂O, CO₂ (Greenhouse Gases)

Regulatory and scientific monitoring and reporting of greenhouse gas emissions.

NO, CO, O₂, SO₂ (Process Monitoring)

In-situ process monitoring, for example in rotary kilns for cement production.

HF (Hydrogen Fluoride)

Fluoride determination for emissions compliance and elemental analysis.

H₂S, H₂O (Fuel Gases)

Quality monitoring in natural gas and biogas processing.

Typical applications

Our hot-wet gas analyzers operate reliably right where traditional extractive cold-dry systems fail:

KI generiert - Hot Wet LASmini OEM sensor von TRACE-GAS
AI generated

Looking for the optimal hot-wet solution for your application?

Whether as a plug-and-play benchtop/rack-mount unit (LASmini) or as a highly integrable OEM module: Our application engineers will configure the optical and physical parameters specifically for your sample gas scenario.